Device Management

When the user display the tab Device a graphical interface will be displayed similar to the one shown in the following figure

The graphical interface consists of a toolbar (items 1 to 6) and a table (8) showing the list of devices. On top of the table on each field you can enter a text filter (7). The buttons in the toolbar are as follows:

1. Add New Device
2. Delete Device
3. Reload: reload the content of the device table
4. Export: export the content of the device table; the drop down menu contains two options:
   • Export all items
   • Export selected items
5. All Last Config: when users click on this button Ne.Mo. get for each device the last configuration gathered with success and make a zipped that is downloaded.
6. Advanced functions

To insert a new device, go to the “Device” tab and click to “Add New Device” as it is shown in the picture below:

Than a popup dialog appears asking for these information:

• IP Address
• Hostname (optional): if not provided, NeMo get the hostname through SNMP asking for sysName
• SNMP Community

After clicking the Add button, Ne.Mo. ties to contact the device and discovers all the available information. A new tab will be created and shown with the name of the device: this tab reports the information discovers by Ne.Mo.

If the IP address is not reachable or a wrong community string is provided, will nevertheless inserted an empty device called “_NEW_DEVICE_xxxxxxx” where xxxxxxx is a number.