Single Device Configuration

When the user dobble click on a single device he enters in the administration page of it. This page consists of a toolbar with four items

• Info
• Configuration
• Entity
• Discovery

The info item consists of a description of device that can be modify manually by the user and automatically by the device. User can find different labels with different information about the status of the device:

• Global Info
• Events
• Monitored Interface
• Device Image
• Device Asset
• Port Statistics
• CPU
• Memory Utilization

In the Global Info user can configure the comunication information with the involved device:

• ID: the ID is the number of registration for each device that has been configured on NeMo and it is a sequence number. This info is automatically generated by the appliance;
• Name: this is the name that user can give to devices. It can be different from the real one that is configured on device;
• IP Address: the ip address is unique IP of the device and must be different from all other devices. The IP configured on NeMo have to be the same configured on the involved device in order to have communication;
• Device Type: here there is the device type that we are managing. By clicking on “Update from device” this field automatically updates. User can also modify it by clicking on : he can choose the name from a drop-down menu;
• Life Cycle Info: user chooses, from a drop-down menu, in which state the device have to be. For example it can be in “Production” or “Maintenance” or “Deinstalled” and so on;
• Status Verification: is a checkbox that allow or not the device status verification of the. By default is unmarked;
• Status: if the “Status Verification” checkbox is marked user sees a green dot plus “UP” or a red dot plus “DOWN” with the related date, for example ““.
• Last status check: periodically – by default every minute – the appliance checks the device status and here is the date of the check;
• SNMP Community: User chooses a name for the SNMP community, It has to be configured on NeMo and it has to be the same configured on the involved device in order to have communication;
• SNMP Version: here is specified the SNMP version, also in this case it has to be the same configured on the involved device in order to have communication;
• Site: in case of different location, user can add the site name in which the device is installed;
• Network: as for the “Site” also for Network user can specify manually at which network the device is part of;
• Auto Configuration: user can select different action from a drop-down menu. For example he can chooses if the appliance must take care of “sistem only” configuration or “all port up” and so on. NeMo automatically check every 24h.
• Power Consumption: when this checkbox is marked NeMo show how much power the device uses when it is power on.
• Description: in this field user can find all the device software information. It is automatically generated by clicking on “Update from device”;
• Location: NeMo automatically updates this field if on device is configured the “snmp-server location”;
• Contact: as for “Location” field NeMo automatically updates this field if on device is configuret the “snmp-server contact”;
• Uptime: this is an automatic generated information about the device uptime. It will reset every time that the device reboot;
• SubNetwork: this is a customisable field;
• Filter Tags: user can add tags in order to search easely on “Graphs” or even to have associable user grant. Each tags must be separated by a “comma”;
• Note: In this field user can write somethings that is not been specificated before about the device.